DanVex manufactures and sells condensing duct dehumidifiers. They are used when air is supplied to the premises through air ducts. Dehumidifiers can be used both as stand-alone units (as they include one or two pressure fans), and as part of a ventilation system. Our professional approach to the development of this type of dehumidifier has led to the largest range of quality dehumidifiers for any request and application.
In our model range there are dehumidifiers from 28 liters to 1000 liters of drainage per day, air pressure up to 11000 Pa.
When choosing a manufacturer, you should pay attention to the advantages of DanVex over the vast majority of manufacturers:
- the design of the dehumidifier provides forced extrusion of condensate, which is obtained as a result of drying the air. Due to this, the service life of the dehumidifier and the time between scheduled maintenance are significantly increased;
- supports Wi-Fi and RS485 (MODBUS) - for remote control and external management;
- fans and compressors are from well-known manufacturers, the best in the market. Claimed characteristics of dehumidifiers for the performance of moisture removal and air pressure are guaranteed. Fans have two speeds;
- the side plates of the heat exchangers are made of stainless steel, not galvanized metal.They are more reliable and serve longer life, as they are not exposed to corrosion;
- copper tubes with aluminum fins and a blue hydrophilic coating do not allow water to linger on the fins of the heat exchanger. This improves the efficiency and life of the desiccant;
- the wall thickness of the copper tubes of the heat exchanger is 0.5 mm, the wall thickness of the curved copper tubes is 0.75-1.00 mm. Two times more than other manufacturers have. This significantly increases the life of DanVex dehumidifiers;
- appearance, quality of materials and workmanship, ease of access during maintenance;
- built-in filters for coarse, medium and fine cleaning, an ultraviolet lamp and an ionizer for cleaning and disinfecting air in each DanVex duct dehumidifiers.
We produce several series of duct dehumidifiers.
The DanVex DD series pulls air from the room and returns it back. It has one input and one output. It can be used to supply air from outside.
Series DD-F (F - from the word Fresh(AIR)). It has two air intakes. One from inside and the second one to mix fresh air from outside. Dried mixed air returns to the room. The mixture is controlled by a special air valve which is adjustable. DanVex DD-F has 2 inlets and one air outlet.
Series DD-FS (S - from the word Street). It has two air intakes. One from inside and the second one to mix fresh air from outside. Two fans. Dried mixed air returns to the room. Part of the air from the room is released outside. DanVex DD-FS has 2 inlets and 2 air outlets.
Series DD-FSR (R - from the word Recuperate). It has two fans and two air intakes. One from inside and the second one to mix fresh air from outside.Fresh air passes through the heat exchanger and receives the temperature from released air. Thus, we save significant energy for heating or cooling indoor air. Dried mixed air returns to the room. Part of the air from the room is released outside. DanVex DD-FSR has 2 inlets and 2 air outlets and a heat recovery unit (air heat exchanger).
All DanVex DD duct dehumidifiers have:
- range of working air temperature, +5 ° С - +38 ° С,
- button control panel with LCD screen and the ability to connect external control via RS485 (MODBUS) protocol, Wi-Fi connection,
- a heat exchanger made of thick copper pipes with aluminum fins with a hydrophobic coating and stainless side walls,
- stainless steel drain pan.
- Ultraviolet lamp and air ionizer for disinfection and purification of the air.
- 2, 3 or 4 filters for air purification depending on the model:
DD series: G4 + F7;
DD-F series: G4 + F7 + H13 (HEPA);
DD-FS and FSR series: G4 + F7 + H13 (HEPA) + F7.